Skip to main content
Home Renovation

Commercial tenant improvement planning in Edmonton

By Prime Renovations Team·November 10, 2026·12 min read
Renovated commercial interior space, illustrating the kind of office or retail tenant improvement covered in this Edmonton guide
Share:

A commercial tenant improvement — usually just called a TI — is the interior construction and finishing work your business carries out inside a leased space to fit it for your use: new partition walls, flooring, ceilings, lighting, millwork, and often electrical, data and plumbing changes. What actually drives a TI project's cost and schedule in Edmonton isn't the construction trades themselves, which work the same whether a space is leased or owned — it's the layer of lease terms, City of Edmonton permitting and Alberta Building Code occupancy rules that sit on top of the build. This guide walks through what a TI covers, who typically pays for what, which permits apply, and how to budget realistically before you request a quote.

For the construction side of the work, see our commercial renovations page, or our interior renovation service for the trades involved in most build-outs. Ready to scope your space? Request a free on-site assessment.

What a tenant improvement covers

Most Edmonton commercial tenant improvements fall into one of three categories: an office refresh that keeps the same use and mostly touches finishes and partitions; a retail or restaurant build-out that changes the occupancy classification and triggers a fuller code review; and a relocation or expansion where a growing business takes on more space in the same building or moves to a new one. Each carries a different permit path and a different realistic timeline, which is why we scope every TI project on-site before quoting it rather than pricing from a square-footage average.

What's common to all three is the split between what the landlord already delivered and what your business is adding on top of it — and that split, more than the trades themselves, is what makes a commercial fit-out different from a residential renovation.

An office refresh is the most common TI we see: new carpet or luxury vinyl flooring, a repainted and reconfigured layout of offices and workstations, updated lighting, and usually no change to how many washrooms or exits the space has. A restaurant or personal-service build-out is often the most involved, because it almost always changes the occupancy classification and can add grease-trap, exhaust or specialized plumbing requirements that a straightforward office never touches. A relocation or expansion sits in between — the construction itself may be simple, but coordinating a move-out date against a move-in date, and sometimes running two leases briefly in parallel, is its own scheduling problem separate from the renovation itself.

Base building versus your tenant improvement scope

Start by separating the base building — what your landlord already delivered — from your tenant improvement scope — what your business needs to add. Base building typically covers the shell and roof, exterior walls and windows, the building's core mechanical, electrical and life-safety systems delivered to your unit, and often a bare concrete floor with an open ceiling and sprinklers roughed in. Everything from that point in — demising walls, interior partitions, flooring, ceiling tile, lighting beyond base code, millwork, washrooms inside your suite, and any HVAC distribution or electrical capacity above what the landlord delivered — is typically the tenant's scope, funded through a tenant improvement allowance where your lease provides one, and out of pocket beyond it.

How much allowance exists, and in what form, is set entirely by your lease. It's commonly structured as either a flat dollar amount or a rate per square foot, and whether unused allowance can be applied to other costs — design fees, furniture, moving costs — is a negotiated term, not a default. Read your lease's tenant improvement and base building clauses, or have us review them with you, before you lock in a design, since they determine your real project budget more than the construction trades do.

Whether your space is a vanilla shell — first-generation space with none of these layers built out — or second-generation space that already carries a previous tenant's partitions, flooring and ceiling also changes your starting point. Second-generation space can mean a faster, cheaper project if the existing layout suits your business, or it can mean a demolition phase your quote needs to account for if it doesn't. Either way, confirm what condition the space is being handed over in before you finalize a design, since "as-is" and "broom swept" mean different things from one landlord to the next.

Permits a tenant improvement usually needs

Most commercial tenant improvements in Edmonton need at least a building permit, and a project that changes the business activity inside the space — for example, converting a retail bay to a restaurant, or industrial space to an office — typically also needs a development permit, since that changes how the space is classified under the City's Zoning Bylaw. We were not able to find a single official City of Edmonton page that consolidates tenant-improvement and change-of-use permitting into one summary, so for a specific project, confirm the exact application path with the City's Development Services, or let us handle it as part of your quote — permitting coordination is included in what we do.

As a general rule: an interior fit-out that keeps the same use and doesn't touch structure, life-safety systems or occupancy classification is the simpler path and may only need a building permit. A change of use — even within the same building, between two different tenants — triggers a more thorough review, because the City checks the new use against zoning and against the Alberta Building Code's occupancy requirements for that classification, not just against the previous tenant's existing approval.

2026 City of Edmonton permit fees

The City of Edmonton's building permit fee is tiered by declared construction value and includes a separate safety code fee. Effective January 1, 2026: projects valued at $0 to $10,000 carry a $120 building permit fee plus a $4.80 safety code fee ($124.80 total); $10,001 to $50,000 carries $385 plus $15.40 ($400.40 total); $50,001 to $100,000 carries $1,080 plus $43.20 ($1,123.20 total); and construction valued over $100,000 carries $2,100 plus $84 ($2,184 total), per the City of Edmonton's posted permit fee schedule (City of Edmonton, effective January 1, 2026). The same fee page lists a separate, flat $415 development permit fee, with no additional safety code fee, for the land-use application a change of business activity commonly needs. These are planning numbers only. We provide a detailed fixed quote after a free on-site assessment.

Construction value2026 City of Edmonton building permit fee
$0 – $10,000$124.80
$10,001 – $50,000$400.40
$50,001 – $100,000$1,123.20
Over $100,000$2,184

Electrical, plumbing, gas and HVAC permits are priced separately from the building permit. See our guide to when a renovation permit is required in Edmonton for how these apply more broadly, and how to choose a renovation contractor in Edmonton for the questions worth asking before you sign anything.

Code requirements that shape the scope

Two code areas affect a commercial TI more than anything else in the construction itself: occupancy classification and barrier-free accessibility. Every business activity is tied to an occupancy classification under the Alberta Building Code — broadly, groups such as assembly, business and personal services, mercantile and industrial — and that classification sets requirements for fire separations between units, exiting and the mechanical systems serving the space. Changing from one occupancy group to another, such as retail to restaurant, is usually what pushes a project from a straightforward building permit into a fuller development and building permit review.

Accessibility requirements sit in Section 3.8 of the Alberta Building Code, administered under Alberta's Safety Codes Act, and they generally apply to new construction, additions, and buildings undergoing renovation or a change of use — not retroactively to existing buildings that aren't being touched. The Government of Alberta's accessibility and Part 10 renovations guidance is the best starting point for understanding how these requirements apply to a renovation project specifically. In practice, this means a tenant improvement that touches your entrance, washrooms or path of travel through the space should be scoped with barrier-free requirements in mind from the first drawing, not added after the fact.

Fire separations between adjoining tenant spaces, and between a tenant space and shared corridors, are rated under the Alberta Building Code based on the occupancy classifications on either side of the wall — a higher-hazard use next door can mean a more fire-resistant demising wall than you'd otherwise need on its own. Exiting requirements follow similar occupancy-based logic: the number of exits, their width and the maximum distance to reach one scale with the occupant load assigned to your classification, which is one more reason a change of use can add scope that a same-use refresh never encounters.

What drives commercial tenant improvement cost

We have not found a dated, verified, Edmonton-specific or Canada-wide cost-per-square-foot figure for commercial tenant improvements that we're comfortable attaching to this page, so rather than borrow an unverified number from a general or American source, here's what actually drives the budget: how much of the existing layout is being demolished and rebuilt; whether partition walls move or new ones go in; how much HVAC zoning and electrical or data capacity needs to be added beyond what the landlord delivered; washroom count and accessibility upgrades; and finish tier, from a basic paint-and-carpet refresh to a full architectural build-out with custom millwork and glass partitions. These are planning considerations only. We provide a detailed fixed quote after a free on-site assessment of your specific space and lease terms.

Phasing a tenant improvement around your business

A TI project generally moves through several phases that often overlap rather than run strictly end to end: design and space planning against your lease's base building drawings; landlord or board approval of your plans where the lease requires it; permit submission and review with the City; procurement of any long-lead materials or equipment; construction; and a final inspection before you can occupy and open. The phase most often underestimated is permit review for anything involving a change of use, since it depends on the City's current volume and your project's complexity rather than a fixed number of weeks — we confirm a realistic schedule as part of your quote rather than promising a generic timeline.

If you're renovating a space that stays partly open, or opening in a multi-tenant building with shared hallways, loading docks or parking, schedule noisy demolition and material delivery around the building's own rules the same way a condo renovation does — see our guide to renovating inside a shared building for logistics that carry over directly to a multi-tenant commercial property.

Quote checklist

Before we quote a commercial tenant improvement, we need: a copy of your lease's tenant improvement and base building clauses; your landlord's base building drawings if available; confirmation of whether your project changes the business activity or occupancy classification from the previous tenant; the building's loading, elevator and work-hour rules if it's multi-tenant; and a room-by-room scope list or a budget allowance per category. A full set of selections rounds out what we need for a fixed number rather than a rough range.

Talk to your landlord or property manager early, even before you finalize a design — many commercial leases require landlord sign-off on tenant improvement plans before construction starts, and that approval step can run in parallel with permitting if it starts soon enough. See how to choose a renovation contractor in Edmonton for what to ask before you sign, and request a free on-site assessment once you have your lease and base building drawings in hand.

Frequently asked questions

What is a commercial tenant improvement?

A tenant improvement (TI) is the interior construction and finishing work a business carries out inside a leased commercial space to fit it for that business's use — new partition walls, flooring, ceilings, lighting, millwork and often plumbing or electrical changes. It sits on top of the landlord's base building, which typically covers the shell, the roof, the exterior walls and the core mechanical, electrical and life-safety systems delivered to the space.

Who pays for a commercial tenant improvement in Edmonton?

It depends entirely on what your lease says. Many commercial leases include a tenant improvement allowance — a landlord contribution toward the fit-out, paid as a lump sum or a rate per square foot — with the tenant responsible for any cost above that allowance unless the lease says otherwise. Review your lease's tenant improvement and base building clauses before you scope the project, since they set your real budget.

Does a commercial tenant improvement need a City of Edmonton permit?

Most do. Interior alterations, partition changes, and especially any change of business activity or occupancy classification typically require a City of Edmonton building permit, and a change of use commonly needs a development permit as well. We could not find a single official City of Edmonton page that summarizes tenant-improvement permitting in one place, so confirm requirements for your specific project with the City's Development Services or during your free on-site assessment with us.

How much does a commercial tenant improvement cost in Edmonton?

We haven't found a dated, verified, Edmonton-specific or Canada-wide cost-per-square-foot figure for commercial tenant improvements that we're comfortable citing, so we don't attach an unverified number to it here. Cost is driven by how much of the space is being changed — partition walls, HVAC zoning, electrical and data capacity, washroom and accessibility work, and finish tier — and we provide a fixed quote after a free on-site assessment.

How long does a commercial tenant improvement take from lease signing to opening?

It varies with scope, but plan for distinct phases that often overlap: design and space planning, landlord or board approval of your plans, permit submission and review, procurement of long-lead materials and equipment, construction, and final inspection before occupancy. A simple office refresh moves faster than a restaurant conversion that changes occupancy classification, so timeline is something we confirm as part of your quote.

Get a Free Commercial Tenant Improvement Estimate

Free on-site consultation, a transparent fixed quote, and a clear schedule before any work begins.

Get a Free Commercial Tenant Improvement Estimate

Planning a commercial tenant improvement in Edmonton? Contact Prime Renovations today for a free consultation and detailed estimate.

Get a Free Commercial Tenant Improvement Estimate